Aeronca Sedan
   HOME

TheInfoList



OR:

The Aeronca 15AC Sedan is a four-seat, fixed
conventional gear Conventional landing gear, or tailwheel-type landing gear, is an aircraft undercarriage consisting of two main wheels forward of the center of gravity and a small wheel or skid to support the tail.Crane, Dale: ''Dictionary of Aeronautical Term ...
light Light or visible light is electromagnetic radiation that can be perceived by the human eye. Visible light is usually defined as having wavelengths in the range of 400–700 nanometres (nm), corresponding to frequencies of 750–420 tera ...
airplane An airplane or aeroplane (informally plane) is a fixed-wing aircraft that is propelled forward by thrust from a jet engine, propeller, or rocket engine. Airplanes come in a variety of sizes, shapes, and wing configurations. The broad spe ...
which was produced by
Aeronca Aircraft Aeronca, contracted from Aeronautical Corporation of America, located in Middletown, Ohio, is a US manufacturer of engine components and airframe structures for commercial aviation and the defense industry, and a former aircraft manufacturer. F ...
between 1948 and 1951. Designed for personal use, the Sedan also found applications in utility roles including
bush flying Bush flying refers to aircraft operations carried out in the bush. Bush flying involves operations in rough terrain where there are often no prepared landing strips or runways, frequently necessitating that bush planes be equipped with abnormally ...
. The Sedan was the last design that Aeronca put into production and was the largest aircraft produced by the company.


Design and development

Like those of other Aeronca designs, the Sedan's
fuselage The fuselage (; from the French ''fuselé'' "spindle-shaped") is an aircraft's main body section. It holds crew, passengers, or cargo. In single-engine aircraft, it will usually contain an engine as well, although in some amphibious aircraft t ...
and tail surfaces are constructed of welded metal tubing. The outer shape of the fuselage is created by a combination of wooden
former A former is an object, such as a template, gauge or cutting die, which is used to form something such as a boat's hull. Typically, a former gives shape to a structure that may have complex curvature. A former may become an integral part of the ...
s and
longeron In engineering, a longeron and stringer is the load-bearing component of a framework. The term is commonly used in connection with aircraft fuselages and automobile chassis. Longerons are used in conjunction with stringers to form structural ...
s, covered with fabric. The cross-section of the metal fuselage truss is triangular, a design feature which can be traced back to the earliest
Aeronca C-2 The Aeronca C-2 is an American light monoplane designed by Jean A. Roche and built by Aeronca Aircraft. Development Roche Monoplane Jean A. Roche was a U.S. Army engineer at McCook Field airfield in Dayton, Ohio. Roche developed an aircraft ...
design of the late 1920s. In a significant design departure from previous Aeronca aircraft, the strut-braced wings of the Sedan are all-metal assemblies. Such combinations of construction types were not common. While the Sedan mated a fabric-covered fuselage to all-metal wings, the contemporary
Cessna 170 The Cessna 170 is an American light, single-engined, general aviation aircraft produced by the Cessna Aircraft Company between 1948 and 1956. It is the predecessor of the Cessna 172, the most produced aircraft in history, which replaced ...
mated an all-metal fuselage to fabric-covered wings. Also unique to the Sedan, among Aeronca designs, are the single-piece wing struts. The
landing gear Landing gear is the undercarriage of an aircraft or spacecraft that is used for takeoff or landing. For aircraft it is generally needed for both. It was also formerly called ''alighting gear'' by some manufacturers, such as the Glenn L. Martin ...
of the Sedan is in a conventional arrangement, with steel tube main gear, and a steerable
tailwheel Conventional landing gear, or tailwheel-type landing gear, is an aircraft undercarriage consisting of two main wheels forward of the center of gravity and a small wheel or skid to support the tail.Crane, Dale: ''Dictionary of Aeronautical Term ...
. Unlike its siblings the Champ and Chief, both of which employ
oleo strut An oleo strut is a pneumatic air–oil hydraulic shock absorber used on the landing gear of most large aircraft and many smaller ones. This design cushions the impacts of landing and damps out vertical oscillations. It is undesirable for an airp ...
s for shock absorption, the Sedan makes used of
bungee cord Bungee cords equipped with metal hooks A bungee cord (sometimes spelled bungle; also known as a shock cord) is an elastic cord composed of one or more elastic strands forming a core, usually covered in a woven cotton or polypropylene sheath. The ...
s to absorb landing and taxi loads. The Sedan is powered by the Continental C-145-2 or Continental O-300-A
engine An engine or motor is a machine designed to convert one or more forms of energy into mechanical energy. Available energy sources include potential energy (e.g. energy of the Earth's gravitational field as exploited in hydroelectric power gen ...
of ; the Franklin 6A4-165-B3 and Franklin 6A4-150-B3, of 165 and , respectively, are also approved for installation. The Sedan features an electrical system, including a starter, as standard equipment. As it had with many of its other models, Aeronca certified a
seaplane A seaplane is a powered fixed-wing aircraft capable of takeoff, taking off and water landing, landing (alighting) on water.Gunston, "The Cambridge Aerospace Dictionary", 2009. Seaplanes are usually divided into two categories based on their tec ...
version of the Sedan, the model S15AC. While the standard Sedan was equipped with a single entry door on the right side, the seaplane version offered a left-side door as well.


Modifications

More than 50 Supplemental Type Certificate modifications are available for the Sedan, many of these intended to modernize the aircraft. One, sold by the current owner of the Sedan design, replaces many of the components ahead of the firewall with updated versions, including a
Lycoming O-360-A1A The Lycoming O-360 is a family of four-cylinder, direct-drive, horizontally opposed, air-cooled, piston aircraft engines. Engines in the O-360 series produce between 145 and 225 horsepower (109 to 168 kW), with the basic O-360 producing ...
engine of , a
constant speed propeller In aeronautics, a variable-pitch propeller is a type of propeller (airscrew) with blades that can be rotated around their long axis to change the blade pitch. A controllable-pitch propeller is one where the pitch is controlled manually by the ...
, a new engine mount, and a fiberglass
cowling A cowling is the removable covering of a vehicle's engine, most often found on automobiles, motorcycles, airplanes, and on outboard boat motors. On airplanes, cowlings are used to reduce drag and to cool the engine. On boats, cowlings are a cove ...
. A second modification from the design holder allows the removal of the oil cooler, which can break and for which there are no replacements available.


Production history

Entering production in 1948, the 15AC Sedan was Aeronca's four-seat addition to its pair of two-seat airplanes, the Champ and
Chief Chief may refer to: Title or rank Military and law enforcement * Chief master sergeant, the ninth, and highest, enlisted rank in the U.S. Air Force and U.S. Space Force * Chief of police, the head of a police department * Chief of the boa ...
, both of which had entered production in 1946. The four-place design gave Aeronca a lineup similar to that of its competitors. Many other companies with two-place designs had been adding four-place versions. Among these four-place competitors were the
Cessna 170 The Cessna 170 is an American light, single-engined, general aviation aircraft produced by the Cessna Aircraft Company between 1948 and 1956. It is the predecessor of the Cessna 172, the most produced aircraft in history, which replaced ...
, PA-14 Family Cruiser,
Stinson 108 The Stinson 108 was a popular general aviation aircraft produced by the Stinson division of the American airplane company Consolidated Vultee, from immediately after World War II to 1950. It was developed from the prewar Model 10A Voyager. St ...
,
Taylorcraft 15 Taylorcraft Aviation is an airplane manufacturer that has been producing aircraft for more than 70 years in several locations. The company builds small single-engined airplanes. The Taylorcraft design is a conventional layout: high-wing, fab ...
and the Luscombe 11A Silvaire Sedan. The Aeronca Sedan was produced from 1948 until 1951, when Aeronca ceased all production of light aircraft. The Sedan production line shut down in 1950, but Sedans were still being assembled in 1951 from the remaining stock of parts. The last Sedan, which was also the last Aeronca-built airplane to fly, left the factory on October 23, 1951. Though Aeronca sold a number of its other designs after ceasing production, the company long maintained ownership of the Sedan. The HAOP-27 Krishak, built by
Hindustan Aeronautics Hindustan Aeronautics Limited (HAL) is an Indian state-owned aerospace and defence company, headquartered in Bangalore, India. Established on 23 December 1940, HAL is one of the oldest and largest aerospace and defence manufacturers in the worl ...
, shows some similarities to the Sedan. Some sources say that the Krishak was produced under license from Aeronca, though the differences are significant enough to call this into question. Aeronca finally parted with the design on 11 April 1991, selling it to (according to
Federal Aviation Administration The Federal Aviation Administration (FAA) is the largest transportation agency of the U.S. government and regulates all aspects of civil aviation in the country as well as over surrounding international waters. Its powers include air traffic m ...
records) “William Brad Mitchell or Sandra Mitchell”. On 10 July 2000, ownership of the design passed to Burl A. Rogers, owner of
Burl's Aircraft Burl's Aircraft LLC is an American aircraft parts manufacturer located in Chugiak, Alaska. The company was founded in 1982 by Burl A Rogers, to design, engineer and manufacture Federal Aviation Administration approved parts for light aircraft. ...
of
Chugiak, Alaska Chugiak is an unincorporated community in the Municipality of Anchorage in the U.S. state of Alaska, situated approximately northeast of downtown Anchorage. Geography Chugiak is located between Eagle River to the south and Eklutna to the nor ...
. Since 2000 Burl's Aircraft has provided parts and technical support to Sedan owners and operators.


Burl's Aircraft production

On February 21, 2008,
Burl's Aircraft Burl's Aircraft LLC is an American aircraft parts manufacturer located in Chugiak, Alaska. The company was founded in 1982 by Burl A Rogers, to design, engineer and manufacture Federal Aviation Administration approved parts for light aircraft. ...
announced that the company was building new Sedan fuselages and a new style fuel valve. On December 8, 2009, Burl's Aircraft announced that they were commencing building new 15AC Sedans. Since Aeronca still exists, but no longer holds the
type certificate A type certificate signifies the airworthiness of a particular category of aircraft, according to its manufacturing design (''type design''). It confirms that the aircraft of a new type intended for serial production, is in compliance with applica ...
, the new production aircraft will be marketed by Burl A. Rogers and Burl's Aircraft LLC as the ''Rogers 15AC Sedan''.


Operational history

The Sedan was designed to be a docile airplane but also a good performer. Pilots found that the Sedan, with its large interior, had plenty of room for baggage and passengers. With its large wing, it had good takeoff performance, and was capable of
short takeoff and landing A short takeoff and landing (STOL) aircraft is a conventional fixed-wing aircraft that has short runway requirements for takeoff and landing. Many STOL-designed aircraft also feature various arrangements for use on airstrips with harsh condition ...
operations. It found a niche as a personal aircraft and in commercial
bush flying Bush flying refers to aircraft operations carried out in the bush. Bush flying involves operations in rough terrain where there are often no prepared landing strips or runways, frequently necessitating that bush planes be equipped with abnormally ...
roles; it could also be equipped for agricultural work. Though the commercial roles have been largely taken over by more modern designs, many Sedans remain in use as personal airplanes. Their ongoing operation is aided by the availability of support from the design owner.


Record flights

A Sedan was chosen by pilots Bill Barris and Dick Riedel for their attempt to set a time aloft record in 1949. Their flight was sponsored by the local
chamber of commerce A chamber of commerce, or board of trade, is a form of business network. For example, a local organization of businesses whose goal is to further the interests of businesses. Business owners in towns and cities form these local societies to ad ...
and the Sunkist growers association, the second sponsor accounting for the naming of the aircraft as the ''Sunkist Lady''. (The accompanying support aircraft, also a Sedan, was called the ''Lady’s Maid''.) Departing from the
Fullerton, California Fullerton ( ) is a city located in northern Orange County, California, United States. As of the 2020 census, the city had a total population of 143,617. Fullerton was founded in 1887. It secured the land on behalf of the Atchison, Topeka and Sa ...
, Municipal Airport on March 15, the flight crossed the United States to
Miami, Florida Miami ( ), officially the City of Miami, known as "the 305", "The Magic City", and "Gateway to the Americas", is a East Coast of the United States, coastal metropolis and the County seat, county seat of Miami-Dade County, Florida, Miami-Dade C ...
, where bad weather forced the pilots to circle for 14 days before making the return trip to Fullerton. Along the way, fuel and food were passed from vehicles on the ground to the pilots during low passes over airport runways. Having reached Fullerton on April 11, the pilots kept flying around the local area until April 26, finally landing at Fullerton Municipal Airport and setting a record of over 1,008 hours, or 42 days, in the air. The Fullerton record was short lived. Inspired by the flight at Fullerton, later in 1949,
Yuma, Arizona Yuma ( coc, Yuum) is a city in and the county seat of Yuma County, Arizona, United States. The city's population was 93,064 at the 2010 census, up from the 2000 census population of 77,515. Yuma is the principal city of the Yuma, Arizona, M ...
, decided to sponsor its own time aloft record attempt. The city needed publicity as it was experiencing economic hard times due to the 1946 closure of Yuma Army Air Field. Pilots Woody Jongeward and Bob Woodhouse piloted the ''City of Yuma, '' a Sedan borrowed from local owners, modified for the flight and painted with the slogan, “The City with a Future.” The flight began on August 24, with the aircraft remaining in the Yuma area throughout, and ended after more than 1,124 hours, or nearly 47 days in the air, on October 10. In 1997, the record-setting airplane was located and returned to Yuma; made airworthy again, it flew on October 10, 1999, to commemorate the 50th anniversary of the end of the record flight. The "City of Yuma" airplane and the refueling car are now on display at City Hall in Yuma.


Variants

;Aeronca 15AC Sedan :Basic model, certified 23 September 1948 and produced 1948–1951. Specified engines are Continental C-145-2 or Continental O-300-A and Franklin 6A4-165-B3 or Franklin 6A4-150-B3 under a Maine Air Service Franklin Aeronca Conversion Kit. ;Aeronca S15AC Sedan :Seaplane model, certified 23 September 1948. Same as the model 15AC except for float installation, larger elevator
trim tab Trim tabs are small surfaces connected to the trailing edge of a larger control surface on a boat or aircraft, used to control the trim of the controls, i.e. to counteract hydro- or aerodynamic forces and stabilise the boat or aircraft in a pa ...
and fuselage reinforcements ;Rogers 15AC Sedan :Proposed new version for production commencing 2010. The prototype aircraft, under construction in December 2009, will be equipped with
Lycoming O-360-A1A The Lycoming O-360 is a family of four-cylinder, direct-drive, horizontally opposed, air-cooled, piston aircraft engines. Engines in the O-360 series produce between 145 and 225 horsepower (109 to 168 kW), with the basic O-360 producing ...
engine,
constant speed propeller In aeronautics, a variable-pitch propeller is a type of propeller (airscrew) with blades that can be rotated around their long axis to change the blade pitch. A controllable-pitch propeller is one where the pitch is controlled manually by the ...
, vertically-arranged instrument panel, extended baggage compartment, large windows, dual seaplane-style doors, lightweight battery, starter, alternator and a 3200 series Alaskan Bushwheel tail wheel with a Pawnee-style tailwheel spring.


Specifications (15AC Sedan)


See also


Citations


References

* * * * * * * * * * * * * * * * * *


External links


National Aeronca AssociationAeronca Aviators ClubBurl’s AircraftAeronca 15AC Sedan serial number gallery
{{Aeronca 1940s United States civil utility aircraft Aeronca aircraft Single-engined tractor aircraft High-wing aircraft Aircraft first flown in 1947